p pjn1na60a / PJW1NA60A / pju1na60a / pjd1na60a may 5,2014-rev.01 page 1 600v n-channel mosfet voltage 600 v current 1 a to-92 sot-223 to-252 to-251ab features ? r ds(on) , v gs @10v,i d @0.5a<7.9 ? ? high switching speed ? improved dv/dt capability ? low gate charge ? low reverse transfer capacitance ? lead free in compliance with eu rohs 2011/65/eu directive. ? green molding compound as per iec61249 std. (halogen free) mechanical data ? case : to-251ab, to-252, sot-223, to-92 package ? terminals : solderable per mil-std-750, method 2026 ? to-251ab approx. weight : 0.0104 ounces, 0.297grams ? to-252 approx. weight : 0.0104 ounces, 0.297grams ? sot-223 approx. weight : 0.043 ounces, 0.123grams ? to-92 approx. weight : 0.007 ounces, 0.196grams maximum ratings and thermal characteristics (t a =25 o c unless otherwise noted) parameter symbol to-251ab/to-252 sot-223 to-92 units drain-source voltage v ds 600 v gate-source voltage v gs + 30 v continuous drain current i d 1 0.4 a pulsed drain current i dm 4 1.6 a single pulse avalanche energy (note 1) e as 52 mj power dissipation t c =25 o c p d 28 3.3 3 w derate above 25 o c 0.22 0.026 0.024 w/ o c operating junction and storage temperature range t j ,t stg -55~150 o c typical thermal resistance - junction to case - junction to ambient r jc r ja 4.46 110 - 37.9 (note 4) - 140 o c/w ? limited only by maximum junction temperature
p pjn1na60a / PJW1NA60A / pju1na60a / pjd1na60a may 5,2014-rev.01 page 2 electrical characteristics (t a =25 o c unless otherwise noted) parameter symbol test condition min. typ. max. units static drain-source breakdown voltage bv dss v gs =0v,i d =250ua 600 - - v gate threshold voltage v gs(th) v ds =v gs ,i d =250ua 2 3.3 4 v drain-source on-state resistance r ds(on) v gs =10v,i d =0.5a - 7.2 7.9 ? zero gate voltage drain current i dss v ds =600v,v gs =0v - 0.02 1.0 ua gate-source leakage current i gss v gs =+ 30v,v ds =0v - + 10 + 100 na diode forward voltage v sd i s =1a,v gs =0v - 0.88 1.4 v dynamic (note 5) total gate charge q g v ds =480v, i d =1a, v gs =10v (note 2,3) - 3.1 - nc gate-source charge q gs - 1.3 - gate-drain charge q gd - 0.4 - input capacitance ciss v ds =25v, v gs =0v, f=1.0mhz - 148 - pf output capacitance coss - 28 - reverse transfer capacitance crss - 0.3 - turn-on delay time td (on) v dd =300v, i d =1a, r g =25 ? (note 2,3) - 6 - ns turn-on rise time t r - 20 - turn-off delay time td (off) - 9 - turn-off fall time t f - 26 - drain-source diode maximum continuous drain-source diode forward current i s --- - - 1 a maximum pulsed drain-source diode forward current i sm --- - - 4 a reverse recovery time trr v gs =0v, i s =1a di f / dt=100a/us (note 2) - 190 - ns reverse recovery charge qrr - 0.53 - uc notes : 1. l=30mh, i as =1.8a, v dd =50v, r g =25 ohm, starting t j =25 o c 2. pulse width< 300us, duty cycle< 2% 3. essentially independent of operating temperatur e typical characteristics 4. r ja is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins mounted on a 1 in ch fr-4 with 2oz. square pad of copper. 5. guaranteed by design, not subject to production testing
p pjn1na60a / PJW1NA60A / pju1na60a / pjd1na60a may 5,2014-rev.01 page 3 typical characteristic curves fig.1 output characteristics fig.2 transfer characteristics fig.3 on-resistance vs. drain current fig.4 on-resistance vs. junction temperature fig.5 capacitance vs. drain-source voltage fig.6 source-drain diode forward voltage
p pjn1na60a / PJW1NA60A / pju1na60a / pjd1na60a may 5,2014-rev.01 page 4 typical characteristic curves fig.7 gate charge fig.8 bv dss vs. junction temperature fig.9 threshold voltage variation with temperature fig.10 maximum safe operating area fig.11 maximum safe operating area fig.12 maximum safe operating area pjw1na60 a
p pjn1na60a / PJW1NA60A / pju1na60a / pjd1na60a may 5,2014-rev.01 page 5 typical characteristic curves fig.12 pju/pjd normalized transient thermal impedance vs. pulse width fig.13 PJW1NA60A normalized transient thermal impedance vs. pulse width fig.15 pjn1na60 normalized transient thermal impedance vs. pulse width
p pjn1na60a / PJW1NA60A / pju1na60a / pjd1na60a may 5,2014-rev.01 page 6 packaging information . to-252 dimension unit: mm to-251ab dimension unit: mm sot-223 dimension unit: mm to-92 dimension unit: mm bottom view
p pjn1na60a / PJW1NA60A / pju1na60a / pjd1na60a may 5,2014-rev.01 page 7 part no packing code version part no packing code package type packing type marking version pju1na60a_t0_00001 to-251ab 80pcs / tube u1na60a halogen free pjd1na60a_l2_00001 to-252 3,000pcs / 13? reel d1na60a halogen free PJW1NA60A_r2_00001 sot-223 2,500pcs / 13? reel 1na60a halogen free pjn1na60a _b0_00001 to-92 1000pcs / bag 1na60a halogen free pjn1na60a_a0_00001 to-92 ammo 2000pcs / box 1na60a halogen free
p pjn1na60a / PJW1NA60A / pju1na60a / pjd1na60a may 5,2014-rev.01 page 8 disclaimer reproducing and modifying information of the docum ent is prohibited without permission from panjit international inc.. panjit international inc. reserves the rights to ma ke changes of the content herein the document anytime without notification. please refer to our website for the latest document. panjit international inc. disclaims any and all liabilit y arising out of the application or use of any product including damages incidentally and consequentially occurred. panjit international inc. does not assume any and a ll implied warranties, includi ng warranties of fitness for particular purpose, non-infringement and merchantability. applications shown on the herein document are ex amples of standard use and o peration. customers are responsible in comprehending the suitable use in particul ar applications. panjit international inc. makes no representation or warranty t hat such applications will be suitable for the specified use without further testing or modification. the products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace mach inery et cetera. customers using or selling these products for use in such applications do so at their ow n risk and agree to fully indemnify panjit international inc. for any damages resulting from such improper use or sale. since panjit uses lot number as the tracking ba se, please provide the lot number for tracking when complaining.
|
